Brake Packages
Package deals on Pads, Rotors and Sensors . Tools and hardware available separately. Page currently under construction. Due to dollar/Euro fluctuations, all prices are subject to change.
Note on Rotor Warranty - I recently had a customer (with an E39 5 series) develop a bad wheel shimmy under braking and was certain that he had warped the rotors. A brake rotor will only be considered for warranty replacement if....
1. The "warp" condition is evident immediately upon installation (the above customer reported the condition 8 months after installing the disks). On any car with a bad wheel bearing, hub runout can create rotor runout in as little as 500 miles.
2. The rotor measures runout of .10mm (.004") or greater...these are BMW's published standards. The customer's rotors only measured .05mm (.002") of runout and were well within spec.
201-262-0412
Kits include pads, rotors and sensors - tools, chemicals and hardware available as required (see pricing at bottom of page)
Kits include........
- Balo brake rotors (Germany's finest) or ATE rear drums (Brembo or Zimmermann will be substituted if Balo is not available...ie, M3/E36 Front, E39 Rear)
- Choice of Brake Pads - PBR Deluxe, PBR Metalmaster, or German factory pads (P=Pagid, T=Textar, J=Jurid, A=ATE). Rear shoes are German.
- Brake wear sensors
Kit Pricing
Model-Front/Rear (German) PBR Deluxe PBR Mtl Mstr 2002 - Front (A) $120.00 (T) $112.00 $115.00 2002tii - Front (A) N/A N/A $135.00 2002/2002tii - Rear (Drum) 320i (77) & 323i (-82) - Front 320i (78-83) - Front 320i (77-83) - Rear (Drum) 318i (84-85) - Front 318i (84-85) - Rear (Drum) 318i (90-91), 318ic (-93) - Front 325e/i (84-91), 325ic (-93) - Front $145.00 (P) $140.00 $138.00 325e/i, 318i (90-91) - Rear (E30) $110.00 (P) $110.00 $106.00 318i/325i/328i - Front (E36) $160.00 (P) $150.00 $155.00 318i/325i/328i - Rear Solid (E36) $150.00 (P) $138.00 $144.00 323i/328i - Rear Vented (E36) 318ti & Z3/1.9 (-3/98) - Front 323i/325i/328i - Front (E46) $200.00 (P/T) $190.00 $200.00 323i/325i/328i - Rear (E46) $175.00 (P) $165.00 $172.00 M3 (88-91) - Front M3 (88-91) - Rear M3 (95-99) - Front (w/Brembo rotors) $205.00 (P) $194.00 $198.00 M3 (95-99) - Rear (w/Balo rotors) $195.00 (P) $190.00 $193.00 528e/524td/533i - Front $164.00 (J) $155.00 $158.00 535i (85-88) - Front $150.00 (P) $146.00 $150.00 M5 (87-88) - Front 5 Series (all - 82-88) - Rear $124.00 (P) $115.00 $120.00 525i/530i/535i (89-95) - Front $185.00 (P) $180.00 $185.00 540i (93-94) - Front $195.00 (P) $186.00 $192.00 M5 (91-93), 540i Sport - Front 525i/530i/535i (89-95) - Rear $145.00 (P) $135.00 $140.00 540i (93-94), M5 (91-93) - Rear $180.00 (P) $175.00 $180.00 525i/528i (97-03) - Front $220.00 (P) N/A N/A 540i (97 thru 2/00) - Front $235.00 (J) $230.00 N/A 530i/540i (3/00-on, E39) - Front $240.00 (P/J) $230.00 N/A 525i/528i/540i (97-03) - Rear $190.00 (P) $190.00 N/A 633i/635i (83-89) - Front $140.00 (P) $135.00 $138.00 M6 (87-88) - Front 633i/635i/M6 - Rear $106.00 (T) $102.00 $104.00 733i/735i/745i (83-86) - Front 733i/735i/745i (8/81-86) - Rear 735i/740i/750i (88-94) - Front (E32) $195.00 (P) $186.00 $192.00 735i (88-94) - Rear (E32) 740i/750i (88-94) - Rear (E32) 740i (95-01) - Front $248.00 (P) 750i (95-01) - Front 740i (95-01) - Rear $190.00 (T) 750i (95-01) - Rear
Exceptions & Comments
- 2002tii kit includes Zimmermann rotors
- For E39 rear, specify if for Sedan or Touring (ie, sensors are different)
Brake Tools & Accessories (Optional)
Lubro Moly LM508 Copper based anti-seize compound -for caliper guide bolts, rotor to hub surfaces, and hub to wheel surfaces - $8.00
SK 3/8" drive allen sockets - for rotor retainer screw and guide bolt removal (5mm - $8.00, 6mm - $8.50, 7mm - $11.00)
Wheel hanger tool - makes mounting the rotor and wheel to the hub much easier - $24.95 (see http://www.ultimategarage.com/whlhgr.html for additional details
Extractor set - left hand drill bit and screw extractor - for removal of stripped retainer screws - $18.00
Accu-Torq torque limiting extension - 17mm/80 ft lbs - $34.95
Facom Convex Socket - 1/2" drive Deep Impact socket - thinwall design - a safer way to remove lug nuts and bolts - contacts fastener on the flats and not the points - 17mm or 19mm - $24.00, 21mm for Japanese cars - $25.00
Release tool for parking brake shoes - for most BMW models 1980 and later (also used for ABS sensor removal) - $22.00
Raytek MT4 Infrared thermometer with laser sighting - great for use at the track for measuring rotor temperatures - $75.00
