A - Tool Plug Tap
(600w max) - with knob E turned to the (left)
AutoStart position, the vacuum will start
when the power tool is switched on.
B - "Push to
Clean" Button
C - Cable Hook and
accessory holder
D -
Suction Hose Setting (AS/E model only) - set
the knob to the corresponding hose diameter.
The AS/E comes standard with a 1 1/4"
(32mm) diameter hose. Settings are 27mm,
32mm, 36mm and 50mm.
E - Power Switch -
turn to the left for AutoStart, to the right
for Manual start. Variable speed control is
available in either mode. This is helpful
when vacuuming delicate items where full
suction is not desirable. SoftStart controls keep
the starting current low to prevent tripping
circuit breakers.
F - Hose Inlet -
accepts all 1", 1 1/4", 1 1/2"
and 2" hoses sold through Ultimate
Garage.