$150.00

Stainless Steel Extra Flexible 3/4" Water Hoses-Contractor Pack
[SWC340PK]

Weight: 15.00 lbs

Falcon 3/4" ID Extra Flexible Stainless Steel Water Hose (Ultra-Flex) - Contractor Pack ($55 savings) - more flexible than the standard Falcon hoses for when a tighter bending radius is required. Great for most water heater, water softener and other 3/4" piping to appliance water connections (not for compressed air or gas). These hoses are 3/4" ID with 3/4" FIP connectors ("Female Iron Pipe"....ie, Female NPT) on both ends.

Contractor pack includes the following assortment of hoses plus 4 tubes of Dow 111 rubber washer lubricant:

  • 3/4 x 6" (x2)
  • 3/4 x 12" (x4)
  • 3/4 x 15" (x4)
  • 3/4 x 18" (x4)
  • 3/4 x 24" (x4)
  • Tube of FalconFlex Dow 111 Washer Lubricant (x4)

Falcon hoses will not discolor, corrode or rust nor will they crimp or kink. Other features include.......

  • 304 Series Corrugated Stainless Steel
  • Full Port - no rubber or plastic hose or inserts to reduce flow
  • Stronger and more flexible than copper
  • Re-usable and Re-bendable
  • Minimal deformity in Curvature...these hoses will hold a bend
  • Burst pressure rated to 1850psi
  • Re-Usable and Re-Bendable
  • No Galvanic Effect (no dielectric union is needed)
  • All fittings are chrome plated solid brass
  • High temp EPDM Washer (-40° to 220 °F)
  • 100% leak tested
  • Falcon Warranty

** The fittings on the 3/4" FIP hoses can be tightened with an adjustable wrench or a 1 3/16" (30mm) open end wrench. Please do not use a pipe wrench. I personally like Facom's 70A series ratcheting flare wrench as this contacts the fitting on all 6 points and is less damaging to the chrome plating. This wrench retails for over $100 but is currently available at a 50+% savings.

Reviews
0 items
Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search