$10.00

Stainless Steel Flexible Water Connector (FIPxSweat)-3/4x15"
[SWTF-15]

Weight: 0.60 lbs

Falcon 3/4" ID Corrugated Stainless Steel Flex Hose (for Water Heaters) - 3/4 FIP x 7/8" Copper Sleeve (sweat) x 15" - recommended for maximum water flow through 3/4" pipe. Great for most water heater connections. This hose is 3/4" ID with 3/4" FIP connector ("Female Iron Pipe"....ie, Female NPT) on on one end and a 7/8" copper sleeve on the other end for sweating to 3/4" copper pipe. Available in 3 different lengths - 15", 18", and 24".

Falcon hoses will not discolor, corrode or rust nor will they crimp or kink. Other features include.......

  • 304 Series Corrugated Stainless Steel
  • Full Port - no rubber or plastic hose or inserts to reduce flow
  • Stronger and more flexible than copper
  • Re-usable and Re-bendable
  • Minimal deformity in Curvature...these hoses will hold a bend
  • Burst pressure rated to 1850psi
  • Re-Usable and Re-Bendable
  • No Galvanic Effect (no dielectric union is needed)
  • All fittings are chrome plated solid brass
  • High temp EPDM Washer (-40° to 220 °F)
  • 100% leak tested
  • Falcon Warranty

** The fittings on the 3/4" FIP hoses can be tightened with an adjustable wrench or a 1 3/16" (30mm) open end wrench. Please do not use a pipe wrench. I personally like Facom's 70A series ratcheting flare wrench as this contacts the fitting on all 6 points and is less damaging to the chrome plating. This wrench retails for over $100 but is currently available at a 50+% savings.

Reviews
0 items
Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search