Hi-Flow Coupler - 3/8" Male NPT - Prevost "Push-button" Quick Couplers
are great for any shop that uses compressed air. I recommend the 1/4"
flow bodies for smaller systems and at the ends of your
(1/4", 5/16" or 3/8" id) air hoses. This European
High Flow profile uses a threaded plug (male for tool bodies,
female for hose connections) which flow approx 33% more volume vs
standard Industrial or Truflate profiles. See photo1 and photo 2. Recommended for paint shops....sanders
and grinders have higher CFM requirements compared to standard
impact tools. These couplers MUST be used with the matching
"High Flow" plugs.
Prevost "Standard" quick couplers release with a single push of the button
on the side of the coupler, an easy one-handed operation.
Technical features of this coupler include........
- 1/4" Flow (37.7cfm)
- European High Flow Profile
- Nitrile seals for leak free
- Stainless steel spring
- Impact resistant plastic
- 175psi working pressure
- Push to connect
- Push button disconnect
Note on Thread Size -
Thread Size (NPT) does NOT refer to the physical dimension of the
pipe or fitting. Please refer to the table below if you're unsure
of which size to buy. For example, a 1/4" NPT pipe thread
(common air tool fitting size) has an outer diameter of
(OD/inches) = Pipe Thread Size (NPT)
- 13/32 (.405") =
- 35/64 (.540") =
- 43/64 (.675") =
- 27/32 (.840") =
- 1-3/64 (1.050") =