<
Attix 30
HEPA Wet & Dry HEPA Vacuum (8 gallon)...... Compact size (18x15x23")
light weight (approx 23lbs net), and low noise (60-62db) make
this version well suited for the mobile contractor. The 1000w
(1.6hp self cooling by-pass motor) is capable of generating 92
inches of lift at the working end of the stock hose. Motor is
"double insulated" for maximum protection.
If you're a contractor or
homeowner who needs HEPA level filtration, the Attix 30 HEPA may be the right choice. This machine
includes a 0.3 micron HEPA element for fine dust and particles.
(Note - HEPA elements meet OSHA, EPA and DOD standards).
The Attix 30 HEPA includes
........
1 1/2"x 10'
oil resistant hose
2pc Chromed Extension Tubes
Chromed steel curved wand
(for attaching tools and extensions)
Combination floor
nozzle
Crevice nozzle
(12")
Universal Brush
nozzle (4
11/16" x 1 5/8")
Upholstery brush
Hepa filter element (0.3
micron)
Fleece filter Bag
8 Gallon Canister capacity
Push & Clean filter
cleaning system
16/3 power cord (this is a
15a/120v machine)
Antistatic Ready ....must
be used with antistatic hoses with AS end cuffs. Any
couplers used must also be AS rated.
In the 8 gallon size, the Attix
30 Basic is a commercial quality machine at a respectable
price.....it is the least expensive in the Attix lineup of
vacuums. It offers several convenience and performance
improvements over the Attix 8 model it replaces. For further
information, please refer to the Attix 30 Overview page.
Note - with the recent bed bug epidemic, some retailers are marketing a
"Bed Bug Vacuum" . All of the Alto vacuums with
sealable fleece filter bags are suitable for bed bug extraction
but the cleaning and eradication typically requires more than dilligent
vacuuming. Hepa level filtration is not required in my opinion as
the bags will capture any of the bugs and eggs. It is very
important to remove, seal and discard the bags (outside the home)
after any bed bug extraction. A turbo floor nozzle (with beater bar) for carpeting and nylon bristle upholstery
nozzle for mattresses and upholstery should be
used and transport plug installed on the inlet port immediately
after turning off the vacuum.
** Fedex
Signature Required on all Attix vacuum
deliveries and/or order in excess of $500 value. Without a
signature (or release on file), Fedex will not leave your package
and it will be returned to the shipper. Customer is responsible
for any redelivery charges.
Freight - additional freight costs will be due
if the ship to address is Zones 5-9 (click on Zone photo to
enlarge) There are additional savings for local pickup or
shipping using your Fedex account. See details.