Facom
Industrial Grade Pneumatic Needle Scaler (V.352F) - replaces V.352 . Used for scaling and
surface preparation. A great for removing weld slag, paint, rust,
epoxy, etc. Needles adjust to the contours of the surface and can
clean an area to bare metal (even irregular surfaces) in a short
amount of time. Delivered with 2mm diameter needles for fine
cleaning with larger 3mm needles available for rough removal.
Suggested retail - $944.00.
Features include.....
- Straight and compact design
allows easy operation even in hard to reach areas.
- High performance motor
delivers 4200 blows per minute for efficient working.
- Tool used for aggressive
material removal for example to remove rust.
- Needle action great to work
on irregular surfaces providing access to cracks or
slots.
- 3 mm needles available as
accessory for rougher removal when needed.
- Delivered with 27 needles
diameter 2 mm with matching needle plate.
- Blows per minute 4200 cpm.
- Working pressure 6,2 bar.
- Average air consumption 24
l/min.
- Average air consumption 0,9
cfm.
- Air inlet 1/4".
- Minimum hose diameter 10 mm
- 3/8".
- Vibration 11,7 m/s²/a.
- Vibration 1,66 m/s²/K.
- Sound pressure 94 dB(A).
- Sound power 105 dB(A).
- Spares (if changing
needles, don't forget to order the appropriate needle
plate):
- Set of 27 needles
diameter 2 mm: V.352FA1.
- Needle plate for 2
mm needles: V.352FSAV16A.
- Set of 12 needles
diameter 3 mm: V.352FA1D3.
- Needle plate for 3
mm needles: V.352FSAV16B.
I've looked at other Needle
Scalers available and there are a lot of online comments about
quality issues. The Facom unit is now
a consideration. This unit has been around for years (as a V.352)
and now refreshed with 2 available needle diameters. Rebuild
parts are now available through Ultimate Garage to keep this tool
in service for years to come.
