Prevost S1 Safety Coupler - for
use with 3/8"
flow industrial profile plugs. Vents line pressure and
disconnects from the pneumatic system with a single push
of the button. Ideal for use at the compressor and at wall drops
throughout the workshop.
- Controlled safe uncoupling
- Avoids risk of dangerous
"hose whip" or accidental disconnection
- Automatic pressure venting
and disconnection
- Optimised flow rate,
limited pressure drop
Technical features of this
coupler include........
- 3/8" Flow (81scfm)
- Heavy duty composite
(scratch free) body
- European High Flow Profile
- Nitrile seals for leak free
connections
- Impact resistant plastic
composite body
- Max service pressure -
174psi
- Anti-static
- Easy to connect under
pressure
Note on Thread Size -
Thread Size (NPT) does NOT refer to the physical dimension of the
pipe or fitting. Please refer to the table below if you're unsure
of which size to buy. For example, a 1/4" NPT pipe thread
(common air tool fitting size) has an outer diameter of
0.540".
Outside Diameter
(OD/inches) = Pipe Thread Size (NPT)
- 13/32 (.405") =
1/8" NPT
- 35/64 (.540") =
1/4" NPT
- 43/64 (.675") =
3/8" NPT
- 27/32 (.840") =
1/2" NPT
- 1-3/64 (1.050") =
3/4" NPT