ABA Mini Hose Clamps - 10pc Sample pack (1 of each size from #8 through #17). If
you're not sure of which sizes you'll need for your shop or
project, this is great place start. Mini clamp features
include.........
- Rounded edges ensure the
clamp grips firmly without cutting the hose.
- Great for fuel, vacuum and
windshield washer hoses
- Nut is retained in the lug,
even when the screw is removed.
- Features 7mm hex head, 9mm
wide band
- Tightening torque = 1.5nm
(1.1ft lbs or 13.3 inch lbs)
- Stainless Steel - 304
Larger Photo - Note: size #15, at the top of the
photo, has a smaller drive screw (slotted head vs phillips head)
and is a popular size for fuel injection hose.
