Sub-Total
Automotive Specialty
Notched Oil Filter Cap Wrench
(3/8" drive) - For oil filters, 92mm in
diameter with 15 points (flats).
Model:
D.141
Facom Wheel Hub Nut Socket-36mm (3/4" Drive) - This is a non-impact relatively thin-wall socket (rated at 525 ft lbs, 700nm max) for removing and tightening (with torque wrench) 36mm hub nuts...
Model:
D.143B
Facom 1/2" Drive Oxygen & NOx Sensor Socket-22mm (D.145A-short reach) - for use on oxygen (lambda) and NOx sensors (including a slot for the connecting wire)....
1/2" Drive,...
Model:
D.145A
Facom 1/2" Drive Oxygen & NOx Sensor Socket-22mm (D.145A-short reach) - for use on oxygen (lambda) and NOx sensors (including a slot for the connecting wire)....
1/2" Drive,...
Model:
U08750002
USAG/Facom 1/2" Drive Oxygen & NOx Sensor Socket-22mm (D.146A-long reach) - for use on oxygen (lambda) and NOx sensors (including a slot for the connecting wire)....
1/2" Drive,...
Model:
U08750012
Facom Oil Filter Chain Wrench (D.149) - for the removal of oil filters in confined spaces when not accessible with a standard filter wrench. Range - 50>110mm. Current stock was made in...
Model:
D.149
Notched Oil Filter Cap Wrench (3/8" drive) - For oil and diesel Purflux filters, 66mm in diameter with 6 notches. Mfg = Facom/USAG. Current stock was made in France. Future supply made...
Model:
D.154
Notched Oil Filter Cap Wrench (3/8" drive) - For oil and diesel Purflux filters, 76mm in diameter with 12 notches. Mfg = Facom/USAG.
Model:
D.155
Currently out of Stock
$47.60 $40.00
USAG/Facom Oil Filter Cap Wrench - Ferrari 348/355/360/430...... 86mm diameter with 18 notches. For oil and diesel Purflux filters. 3/8" square drive. This is the size used on the 348/355/360...
Model:
U04461020
Notched Oil Filter Cap Wrench (3/8" drive) - For oil and diesel Purflux filters, 96mm in diameter with 9 notches. (Note-the newer production cap wrenches now have 18 notches. I have 1 in stock...
Model:
D.157
Notched Oil Filter Cap Wrench (3/8" drive) - For oil filters, 66.5mm in diameter with 14 points (flats).
Model:
D.159
Currently out of Stock
$46.70 $42.95
Notched Oil Filter Cap Wrench (3/8" drive) - For oil filters, 74mm in diameter with 15 points (flats). Current stock was made in France. Future supply is made in Taiwan.
Model:
D.160
