| 113A.10C |
Adjustable wrench 10" |
1 |
| 167A |
Outside-circlip® pliers 13 - 18 |
2 |
| 169A |
Inside-circlip® pliers13 - 18 |
2 |
| 181A.25CPE |
Lockable multigrip pliers |
1 |
| 185.20CPE |
Sheathed straight half-round nose pliers |
1 |
| 187.18CPE |
Sheathed combination pliers |
1 |
| 188.16CPE |
Sheathed flat-nose pliers |
1 |
| 192.16CPE |
Piano wire diagonal cutters |
1 |
| 200H.32 |
Riveting hammer 32 mm |
1 |
| 208A.32CBA |
Interchangeable-tip mallets |
1 |
| 247.G |
Sheathed nail-sets: 2 - 4 mm |
2 |
| 249.G |
Sheathed drift punches set: 2 - 4 mm |
2 |
| 256.4 |
Precision centre punch 4 mm |
1 |
| 263.18 |
Chisel |
1 |
| 44.JE12 |
Open-end wrenches 6 to 32 mm |
12 |
| 440.JE18 |
Combination wrenches 6 to 24 mm |
18 |
| 501 |
Long-nose lock-grip pliers |
1 |
| 603F |
Hacksaw frame |
1 |
| 668B.8 |
Bimetal hacksaw blades |
10 |
| 82H.JP9A |
Sleeve set of hexagonal keys: 1.5 to 10 mm |
9 |
| 840.1 |
Electricians knife with wire stripper |
1 |
| 89.JP8A |
Torx® keys no. 10 to 45 |
8 |
| 893.316 |
Locking tape measure 3 m |
1 |
| A.VE |
1,000 Volt insulated screwdrivers: slotted head 4x100 - 6.5x150 mm |
2 |
| AND |
Screwdrivers for Pozidriv® PZ heads no. 0-1-2 |
3 |
| ANF |
Screwdrivers for slotted heads 6.5x150 - 8x200 mm |
2 |
| ANP |
Screwdrivers for Phillips® PH head 0-1-2 |
3 |
| AN |
Screwdrivers for slotted heads: 3x75 - 4x100 - 5.5x100 mm |
3 |
| AP.VE |
1,000 Volt insulated screwdrivers: Phillips® PH 1-2 |
2 |
| AP6X80 |
Square punch |
1 |
| AV.HT1B |
Voltsage tester screwdriver 90 to 480 Volts |
1 |
| R2NANO |
1/4" sockets: 5.5 to 14 mm and accessories (in a case) |
38 |
| S.440AP |
1/2" sockets: 8 to 32 mm and accessories (in a case) |
29 |
| STG |
Files |
5 |
