Sub-Total
Sawing/Cutting/Drilling
USAG
25pc Metric Drill Bit Set (988 MA/S25) - the drill bits in this set are
identical to those in the Facom 222A.TJ25. The case is nicer with
the USAG set with a slide-lock to prevent...
Model:
988 MA/S25
Facom
25pc Metric Drill Bit Set (222A.TJ25) - For steel up to 700 MPa, stainless
steel, grey cast-iron and aluminum alloy. 25 drill bits (1-13mm) in .5mm increments.
Model:
222A.TJ25
Facom
50pc Metric Drill Bit Set (222A.TJ50) - For steel up to 800 MPa, stainless
steel, grey cast-iron and aluminum alloy. Great set of small precision bits (up to 5.9mm).
50 drill bits...
Model:
222A.TJ50
Facom
81pc Metric Drill Bit Set (222A.TJ81) - For steel up to 800 MPa, stainless
steel, grey cast-iron and aluminum alloy.
81 drill bits 2 to 10 mm
(in 1/10mm increments)...
Model:
222A.TJ81
Facom
3pc Tap Set for Hard Metals (20x2.50mm) - See photo details. 1 available at this price.
Model:
227.3x250T3
Facom
3pc Tap Set for Hard Metals (8x1.25mm) - common bolt/stud size. See photo
details.
Model:
227.8x125T3
Facom
Tap & Drill Bit Set (with Cobalt-steel Taps)(for 3mm>12mm) - Each set includes 3 taps (taper,
second, bottoming) and equivalent drill bit 222A.T.
Model:
227.SJ2A
Facom 90 Degree Cone Bit for Countersinking -10mm Cone width (229.TT2) - drill a pilot hole and follow with the appropriate sized countersink bit. Based on the Spax screws I sell, the 10mm...
Model:
229.TT2
Facom 90 Degree Cone Bit for Countersinking -16.5mm Cone width (229.TT3) - drill a pilot hole and follow with the appropriate sized countersink bit. If you use a lot of #12 & #14 screws (or...
Model:
229.TT3
Facom 90 Degree Cone Bit Set for Countersunk Screws (4pc + Lubricant) - drill a pilot hole and follow with the appropriate sized countersink bit. This set includes all 4 available sizes in this...
Model:
229.TTJ4
Facom
3pc Reaming Bit Set (229A.J3) - includes 3 bits, range 3-30.5mm. HSS for
drilling, deburring and reaming thin sheet steel and nonferrous
metals. Max recommended thickness : 4 mm . Supplied...
Model:
229A.J3
Facom
229A Stepped Drill Bit (#0) - for precision-drilling straight bores in all
materials. No pilot hole required. Parallel shank with 3 flats
for positive rotation. 4 different bits to chose...
Model:
229A.ST0
