Sub-Total
New products
Sort by:
Facom
Heavy Duty Impact Torx Bit (T60) - impact torx bit with 1/2" hex base. Should
be used with a suitable Impact Bit Holder.....eg, NJ.237A (3/8" drive) or NS.237A (1/2" drive).
Model:
NEX.60A
Facom
Heavy Duty Impact Torx Bit (T60) - impact torx bit with 1/2" hex base. Should
be used with a suitable Impact Bit Holder.....eg, NJ.237A (3/8" drive) or NS.237A (1/2" drive).
Model:
NEX.60A
Facom
Heavy Duty Impact Torx Bit (T55) - impact torx bit with 1/2" hex base. Should
be used with a suitable Impact Bit Holder.....eg, NJ.237A (3/8" drive) or NS.237A (1/2" drive).
Model:
NEX.55A
Facom
Heavy Duty Impact Torx Bit (T50) - impact torx bit with 1/2" hex base. Should
be used with a suitable Impact Bit Holder.....eg, NJ.237A (3/8" drive) or NS.237A (1/2" drive).
Model:
NEX.50A
Facom
Heavy Duty Impact Torx Bit (T50) - impact torx bit with 1/2" hex base. Should
be used with a suitable Impact Bit Holder.....eg, NJ.237A (3/8" drive) or NS.237A (1/2" drive).
Model:
NEX.50A
Spare
6mm Pin Set (116.100E2) - for Facom 116.100 Sliding Jaw Pin Wrench.
2 Pins. (Note-Facom #
116.100E1 = 4mm and 116.100E2 = 6mm.
Model:
116.100E2
Facom
Sliding Jaw Pin Wrench (116.100) - for nuts with side holes. Supplied with 2 sets
of interchangeable pins (116.100E1 = 4mm and 116.100E2 = 6mm).
Capacity is 0-100mm. The moving jaw slides...
Model:
116.100
Facom
1/2" Drive Impact Tool module (MOD.NS2) - includes the following..........
1/2" drive Impact
sockets (13>32mm) -...
Model:
MOD.NS2
Currently out of Stock
$580.00
Facom
Cylinder Head Socket & Bit Module Set (MOD.CH) - 24 popular sockets and bits for
tightening and loosening engine and cylinder head fasteners.
Includes the following........
Model:
MOD.CH
Currently out of Stock
$765.00
Facom 43 Series Flanged Flare Nut Wrench Module Set - MOD.43 (5pc)...... Flange strengthened 6-point split ring for use on stubborn fittings such as seized pipe unions. Short shank for easier...
Model:
MOD.43
Currently out of Stock
$277.00 $254.00
