Stainless Steel Faucet Supply Hose (1/2" FIP x 3/8 Comp)-30" (4 available)

Falcon Corrugated Stainless Steel Faucet Supply Hose (1/2" FIP x 3/8 Compression) - 30" - 7/16" Outside diameter with full port connections for maximum water flow. Safer alternative to braided hose. No plastic nuts or rubber tubing. 1/2" FIP at one end and 3/8" compression at the other. Typically purchased in pairs.

Falcon hoses will not discolor, corrode or rust nor will they crimp or kink. Other features include.......

• 304 Series Corrugated Stainless Steel
• Stronger and more flexible than copper
• Re-usable and Re-bendable
• Minimal deformity in Curvature...these hoses will hold a bend
• Burst pressure rated to 2200psi
• Re-Usable and Re-Bendable
• No Galvanic Effect (no dielectric union is needed)
• All fittings are chrome plated solid brass
• High temp EPDM Washer (-40°F to 220°F)
• 100% leak tested

Tools Required - The fittings on this hose can be tightened with an adjustable wrench or with the proper sized open end wrenches ....11/16" (17mm) at the compression fitting and 15/16" (24mm) at the FIP fitting.