Sub-Total
Drill Bits, Taps & Dies
Facom 221 Series ISO Metric RH Thread Split Die - M10x150 - chrome-vanadium HSS hardened to 62/64 HRc. Tapered adjusting screw. Click on photos to enlarge for further details.
Model:
221.10x150
Facom 221 Series ISO Metric RH Thread Split Die - M12x175 - chrome-vanadium HSS hardened to 62/64 HRc. Tapered adjusting screw. Click on photos to enlarge for further details.
Model:
221.12x175
Facom 41pc Tap and Die Set (221.227SJ2/221.227SJ2A) - sizes M3 to M18. Same as 221.227J2 but with Cobalt Steel Taps (for better torque and wear resistance as compared to standard steel taps). Click...
Model:
221.227SJ2
Currently out of Stock
$3,910.00 $2,950.00
Facom
221 Series ISO Metric RH Thread Split Die - M6x100 - chrome-vanadium HSS hardened to 62/64
HRc. Tapered adjusting screw. Click on photos to enlarge for
further details.
Model:
221.6x100
Facom
221 Series ISO Metric RH Thread Split Die - M8x125 - chrome-vanadium HSS hardened to 62/64
HRc. Tapered adjusting screw. Click on photos to enlarge for
further details.
Model:
221.8x125
Assorted
"TC" Series Drill bits- Item "B" in photo. Industrial cross-tip ground
twist bits. For carbon steel (up to 800MPa), stainless steel,
grey cast iron and aluminum...
Model:
222.TC
Assorted
"TL" Series Drill bits- Item "A" in photo. Suitable for sheet metal (less
than 1/8" thick) and composites. Special profile for clean
cut holes. No pilot hole...
Model:
222.TL
Facom Ground Twist Drill Bit - 10mm (222A.T10) - Industrial cross-tip ground twist bits. For carbon steel up to 800 MPA, stainless steel, grey cast-iron and aluminium alloy. Self-centering with 118...
Model:
222A.T10
Facom
19pc Metric Indexed Drill Bit Set (222A.TJ19) - Hot-rolled high-speed steel drills for
steels up to 400 MPa hardness. Size 1-10mm in .5mm increments.
Model:
222A.TJ19
USAG 25pc Metric Drill Bit Set (988 MA/S25) - the drill bits in this set are identical to those in the Facom 222A.TJ25. The case is nicer with the USAG set with a slide-lock to prevent accidental...
Model:
988 MA/S25
Facom 25pc Metric Drill Bit Set (222A.TJ25) - For steel up to 700 MPa, stainless steel, grey cast-iron and aluminum alloy. 25 drill bits (1-13mm) in .5mm increments.
Model:
222A.TJ25
Facom 50pc Metric Drill Bit Set (222A.TJ50) - For steel up to 800 MPa, stainless steel, grey cast-iron and aluminum alloy. Great set of small precision bits (up to 5.9mm).
50 drill bits 1mm...
Model:
222A.TJ50
