Sub-Total
Facom & USAG Tools
Air & Cordless Power Tools
Automotive Specialty
Electrical / Insulated
Ferrari/Facom Tool Sets
Fluorescent Tool Range
Grip Series Tools
Hammer Tools
Lighting (Facom)
Maintenance & Pipework
Measuring & Marking
MicroTech-Electronics
Module Tool Sets
Pliers
Pullers & Extractors
Ratchets & Accessories
Rivet Tools
Safety Lock System (SLS)
Sawing/Cutting/Drilling
Screwdrivers & Bits
Socket Tool Sets
Sockets-Open Stock
Spare Parts-Facom/USAG
Tool Sets & Storage
Torque Control
Torx, Hex & XZN Tools
Wrenches
Miscellaneous Facom
Classic Facom (Pre-2005, NLA)
USAG/Facom 30° Flex Driver-7mm (D.133C7) - new Protwist handle. Made in France. Great for use with hose clamps or fastener access in tight spots (driver shaft has approx 30 degrees of flex)....
Model:
U02980294
USAG/Facom 30° Flex Driver-8mm (D.133C8) - new Protwist handle. Made in France. Great for use with hose clamps or fastener access in tight spots (driver shaft has approx 30 degrees of flex)....
Model:
U02980295
Notched Oil Filter Cap Wrench
(3/8" drive) - For oil filters, 65mm in
diameter with 14 points (flats).
Model:
D.139
Facom
Notched Oil Filter Cap Wrench - 74mm with 14 notches - 3/8" drive. This is the one to
use for BMW M10 and M20 motor notched oil filters.
Model:
D.140
Notched Oil Filter Cap Wrench
(3/8" drive) - For oil filters, 92mm in
diameter with 15 points (flats).
Model:
D.141
Facom Wheel Hub Nut Socket-36mm (3/4" Drive) - This is a non-impact relatively thin-wall socket (rated at 525 ft lbs, 700nm max) for removing and tightening (with torque wrench) 36mm hub nuts...
Model:
D.143B
USAG Wheel Hub Nut Socket-36mm (3/4" Drive) - This is a non-impact relatively thin-wall socket (rated at 525 ft lbs, 700nm max) for removing and tightening (with torque wrench) 36mm hub nuts...
Model:
U02712005
Facom 1/2" Drive Oxygen & NOx Sensor Socket-22mm (D.145A-short reach) - for use on oxygen (lambda) and NOx sensors (including a slot for the connecting wire)....
1/2" Drive,...
Model:
D.145A
Facom 1/2" Drive Oxygen & NOx Sensor Socket-22mm (D.145A-short reach) - for use on oxygen (lambda) and NOx sensors (including a slot for the connecting wire)....
1/2" Drive,...
Model:
U08750002
USAG/Facom 1/2" Drive Oxygen & NOx Sensor Socket-22mm (D.146A-long reach) - for use on oxygen (lambda) and NOx sensors (including a slot for the connecting wire)....
1/2" Drive,...
Model:
U08750012
Facom Oil Filter Chain Wrench (D.149) - for the removal of oil filters in confined spaces when not accessible with a standard filter wrench. Range - 50>110mm. Current stock was made in...
Model:
D.149
Notched Oil Filter Cap Wrench (3/8" drive) - For oil and diesel Purflux filters, 66mm in diameter with 6 notches. Mfg = Facom/USAG. Current stock was made in France. Future supply made...
Model:
D.154
