Sub-Total
Sawing/Cutting/Drilling
Facom Low Effort Diagonal Cutters (171.20EL) - Demultiplication system for increased capacity with minimum cutting effort. Cuts steel piano wire 200 kg/mm², diameter 2.5 mm. Red painted...
Model:
171.20EL
Facom VSE Series 1000v Insulated Knife (1820.AVSE) -
Model with thick, angled, flat end blade.
Soft bi-material handle.
Storage case.
Active blade length: 60 mm.
Max dimensions: 185...
Model:
1820.AVSE
USAG Compact Hacksaw with 6" Blade (201 S) -Compact light-duty saw for plastics, wood and metal. Great for working in tight spots. (Note- I use this one anytime I have to make an irrigation...
Model:
U02010003
USAG Electrician's Scissors (207N) - Bimaterial handles. Stainless steel body with micro toothing. Limited supply.
Integrated cable cutter, outside diameter capacity max 15 mm
Supplied...
Model:
U02070007
Facom 221 Series ISO Metric RH Thread Split Die - M10x150 - chrome-vanadium HSS hardened to 62/64 HRc. Tapered adjusting screw. Click on photos to enlarge for further details.
Model:
221.10x150
Facom 221 Series ISO Metric RH Thread Split Die - M12x175 - chrome-vanadium HSS hardened to 62/64 HRc. Tapered adjusting screw. Click on photos to enlarge for further details.
Model:
221.12x175
Facom 41pc Tap and Die Set (221.227SJ2/221.227SJ2A) - sizes M3 to M18. Same as 221.227J2 but with Cobalt Steel Taps (for better torque and wear resistance as compared to standard steel taps). Click...
Model:
221.227SJ2
Currently out of Stock
$3,910.00 $2,950.00
Facom
221 Series ISO Metric RH Thread Split Die - M6x100 - chrome-vanadium HSS hardened to 62/64
HRc. Tapered adjusting screw. Click on photos to enlarge for
further details.
Model:
221.6x100
Facom
221 Series ISO Metric RH Thread Split Die - M8x125 - chrome-vanadium HSS hardened to 62/64
HRc. Tapered adjusting screw. Click on photos to enlarge for
further details.
Model:
221.8x125
Assorted
"TC" Series Drill bits- Item "B" in photo. Industrial cross-tip ground
twist bits. For carbon steel (up to 800MPa), stainless steel,
grey cast iron and aluminum...
Model:
222.TC
Assorted
"TL" Series Drill bits- Item "A" in photo. Suitable for sheet metal (less
than 1/8" thick) and composites. Special profile for clean
cut holes. No pilot hole...
Model:
222.TL
Facom Ground Twist Drill Bit - 10mm (222A.T10) - Industrial cross-tip ground twist bits. For carbon steel up to 800 MPA, stainless steel, grey cast-iron and aluminium alloy. Self-centering with 118...
Model:
222A.T10
